CPCELLTMCFP series of immersion (curtain) membrane modules mainly have two series (CFP-PVDF and CFP-PTFE) and three specifications (CFP-A1, CFP-A2, CFP-A3)
|
CPCELLTM CFP series immersion (curtain) membrane module selection table |
|||
|
Product Series |
Model |
Suitable field |
Design water production L/D·curtain |
|
CPCELLTMCFP series immersion (curtain) film |
CFP—A1 |
Urban domestic sewage treatment and water reuse in buildings;
|
3500~5500 |
|
CFP—A2 |
5500~8500 |
||
|
CFP—A3 |
7200~10800 |
||
Net source CFP series immersion (curtain) PVDF film (CFP-PVDF)
Membrane material: Polyvinylidene fluoride nano-alloy (PVDF)
Scope of application: wastewater treatment, reuse of water
Advantages: saving the first phase of civil construction investment, improving the effluent quality of the sewage treatment system, etc.
CPCELLTMCFP series immersion (curtain) PVDF membrane module performance parameter table
|
Model |
CFP—A1—PVDF |
CFP—A2—PVDF |
CFP—A3—PVDF |
|
|
specification |
Dimensions a*b*c(mm) |
534×450×1020 |
534×450×1520 |
534×450×2020 |
|
Two sets of water pipe center distance (mm) |
1020 |
1520 |
2020 |
|
|
Membrane wire outer diameter (mm) |
2.2 |
|||
|
Membrane area (m2/curtain) |
7 |
11 |
16 |
|
|
Interface mode |
DN32 plastic tube |
|||
|
performance |
Membrane material |
PVDF alloy |
||
|
Standard design water production (L/D·curtain) |
3500~5500 |
5500~8500 |
7200~10800 |
|
|
Separation aperture (μm) |
0.2 |
|||
|
Negative pressure resistance (Mpa) |
0.06 |
|||
|
Porosity(%) |
88~95 |
|||
|
Effluent turbidity (NTU) |
≤1 |
|||
|
Effluent suspension (mg/L) |
≤1 |
|||
|
Conditions of Use |
Recommended design operating pressure |
0.02 |
||
|
Feed pH |
2~10 |
|||
|
Operating temperature (°C) |
5~45 |
|||
|
Gas to water ratio (volume ratio) |
15:1~30:1 |
|||
|
Aeration direction |
Proline fiber direction |
|||
|
Membrane fiber installation slack (mm) |
10~30 |
|||
|
Test Conditions |
Sludge concentration MLSS (mg/L) |
3000~10000 |
||
|
Test solution |
Second sinking pool sewage |
|||
|
Test temperature (°C) |
25 |
|||
|
Test solution negative pressure (Mpa) |
0.02 |
|||
The performance parameter table of this product is written according to the experience and facts of the net source. The net source confirms the correctness and reliability of the data, and the relevant design parameters are for reference only. Since the user's conditions of use are not controlled by a net source, the customer is responsible for determining whether the net source product is suitable for its use. For specific design issues, please consult the source directly and the source will provide all possible assistance. The data in this table indicates that it may be changed or updated without prior notice. Please understand.
Scan It
